How do I replace indoor non-illuminated menu boards?

If you have a Benchmark or non-illuminated system where graphics adhere magnetically, follow these steps for replacing your graphic:

1. Clean the backboard
   • A lot of grease and dust build up could impair the graphic from sticking to the board
   • Rubbing alcohol will clean & dry best
2. Gently roll the new graphic up from the bottom
   • Thin graphics can crease as easily as paper, so use care when handling
3. Align the top of the graphic to flush with the top edge of the board & then unroll
4. If the graphic is crooked — roll the graphic back up and re-align the top
   • Thin graphics can tear easily if pulled

Tip:

If you have smaller boards hanging from cleats, it will be easier to add new graphics if you remove the backboard from the wall (see Video B)

Videos:

1. Replacing Graphics Video A

2. Replacing Graphics Video B